Disclaimer: These instructions are for replacing existing door hardware on a standard internal wooden door. Ensure the area is clean and free from dust before starting. Always support the door when working on hinges.

What's Required:

  1. Screwdriver
  2. Drill with appropriate drill bits
  3. Pencil
  4. Tape measure or ruler
  5. Chisel (if minor adjustments are needed)

Note: Both fixing options are provided. For a stronger and more durable installation, we recommend using the bolt-through fixings where possible.


1. Prepare the Door

Remove all existing hardware including handles, lock, hinges. Ensure all openings are clean and free from debris before installing new components.

 


2. Install the Hinges

Position the new hinges in the existing recesses on the door and frame. Replace one hinge at a time to help keep the door aligned. Secure each hinge using the screws provided. Check the door opens and closes smoothly before continuing.

 


3. Install the Mortice Sashlock

Insert the sashlock into the existing mortice in the edge of the door. Ensure it sits flush with the door edge.

Important: Make sure the angled side of the latch faces the door frame so it operates correctly. Secure the faceplate using the screws provided.


4. Insert the Spindle

Insert the spindle through the handle follower in the sashlock.


5. Position & Align the Handles

Place the handles onto the spindle on both sides of the door. Hold them in position and ensure they are straight, level and aligned with sashlock key holes.


6. Mark Fixing Points

Using a pencil, mark the fixing holes for the handles. Mark bolt-through holes if using bolt-through fixings.



7. Remove & Drill Pilot Holes

Carefully remove the handles and spindle. Drill pilot holes at the marked positions. Ensure holes are straight and clean.



8. Reassemble & Secure

Reinsert the spindle through the sashlock. Refit the handles. Secure using bolt-through fixings or surface-mounted screws. Tighten all screws until secure.

9. Test the Door

Open and close the door to ensure smooth movement. Operate the handles to check the latch retracts and returns correctly. Insert the key and test the locking function. Make any small adjustments if needed.

 

Final Note:

You’ve now successfully installed your lock door handle pack. Always check all components operate smoothly before regular use.

19 novembre, 2026 — Hassan Jamil