A Quick Guide on Installing Euro Cylinder Locks

Now that you have learned the importance of Euro it’s also important to know how to install them correctly. This guide will break down the steps for you, luckily installing a euro cylinder if done correctly should take 10-30 minutes. It can be installed typically with a screwdriver and sometimes a file.

Uninstalling the old lock

1. If you are replacing an old lock, you first remove the screw with a screwdriver.
2. Insert a key into the lock from the inside. Then turn to the key to the left and the right, while pulling it towards you. As you continue to turn the key you will feel the cylinder come out.
3. At some point you should be able to slide the old euro cylinder out. The next step is installing the new lock.

How to Install

1. First insert a key into the lock, ensuring it is aligned with the cylinder cam and the body of the lock.
2. Insert the lock into the door
3. Use the central screw to screw into the lock, make sure the lock is securely fitted.
4. If the fitting is too tight, remove the lock and shave down the opening of the door. Fit the lock again to check if it fits better.
5. If there are any issues with the fitting and you need assistance, a locksmith would be the best option.

In closing

You can see how straightforward installing and uninstalling a euro cylinder is. Should you need information on how to maintain it. You can learn how to do so here.