Congratulations on getting your new XFORT Euro cylinder today, I’m going to show you just how easy it is to replace a double cylinder lock. If you’ve got 10 minutes, a screwdriver and a ruler you’re good to go. Let’s get started!

Step 1: First grab the key to your current lock and insert it into the cylinder from the internal side of the door. 

Step 2: Find the fixing screw on the edge of your door, right by the cylinder. Use a screwdriver to unscrew it all the way. Once that’s out, slightly turn the key left or right until you feel the cam align, apply pressure to the opposite side of the cylinder. And there you go. The old cylinder should slide right out. Nice and easy!

Step 3: Measure from the centre of the fixing screw hole to each end of the cylinder. To make sure your new cylinder is the perfect fit. 

Step 4: Take your new cylinder and align it with the slot in your door. Insert it gently while turning the key just a little to align the cam and help it slide in smoothly.

Step 5: Fit the euro locks with fixing screws and fit them in. Make sure it’s tight enough to hold the cylinder securely, but don’t overdo it.

Step 6: Final test. Insert your key and turn it both ways. Check that it locks and unlocks smoothly.

Pro tip: If the key feels stiff, don’t force it. Just check the alignment and make sure everything’s in place. And there you have it! A brand-new double cylinder lock installed in just a few simple steps. 

November 19, 2026 — Hassan Jamil