Fitting Instructions: Lever on Rose Door Handles
Ready to refresh your interior doors? This quick and easy guide walks you through how to install your XFORT rose handles step by step — no fuss, just a secure, smooth fit. Whether you're replacing old hardware or upgrading to something sleeker, we’ve got you covered with everything you need to get the job done right.
Before you start, make sure you’ve got the right tools on hand:
1. Screwdriver
2. Pencil
3. Tape measure or ruler
Got those ready? Let’s get started.
Disclaimer: These instructions are for replacing existing door handles where a tubular latch is already installed. Ensure the area is clean and free
from dust before starting.
What's required
1. Screwdriver
2. Drill with appropriate drill bit (for bolt-through
holes)
3. Pencil
4. Tape measure or ruler
Installation Steps:
1. Check Tubular Latch Position:
a. Confirm the tubular latch is
already fitted in the door.
b. Check that it operates smoothly
before continuing.
2. Insert the Spindle:
a. Feed the spindle through the hole
in the door, passing through the
tubular latch
a. Fit the lever on rose handles
onto the spindle on both sides of
the door.
b. Hold the handles in place and
ensure they are straight and level.
4. Mark Bolt-Through Fixing
Points:
a. Using a pencil, mark the
bolt-through fixing holes on the
door through the holes in the rose
plates.
b. These marks will guide you
where to drill for a secure
installation.
a. Carefully remove both handles.
b. Then remove the tubular latch
from the door to prevent damage
during drilling.
Holes:
a. Drill holes at the marked
positions, ensuring they are straight
and clean to allow bolt-through
fixings to pass through.
Latch:
a. Place the latch back into the
door, ensuring it is flush and
aligned.
the Handles:
the latch.
b. Fit both handles onto the
spindle again.
c. Secure them firmly using the
bolt-through fixings provided,
tightening with a screwdriver.
Functionality:
the latch retracts and returns
smoothly.
b. Make any minor adjustments if
necessary to ensure smooth
operation and correct alignment.
Now your XFORT rose handles are in place, your door’s looking sharper and working smoother. For the best hold, we always recommend using the bolt-through fixings provided. Want to explore more ways to upgrade your space? From latches and hinges to smart locks and style-led finishes, visit xfort.co.uk for more ideas that help you do DIY your way.